On March 28, just 15 months after breaking ground on the development, KTM North America and parent company Pierer Mobility celebrated the grand opening of their new North American headquarters in Murrieta, California.

In attendance at the event were Stefan Pierer, CEO of Pierer Mobility AG; members of Pierer Mobility AG’s global board of directors; employees of KTM North America, including members of the KTM, Husqvarna, and GasGas factory race teams; local politicians and dignitaries; and numerous invited guests.

Related: 2023 KTM 890 Adventure | First Ride Review

“This is an emotional day for me,” said Pierer. “Exactly 30 years ago, I started in the USA with only a dozen employees. Today, we are Europe’s leading powered two-wheeler group, and we’re selling approximately 100,000 units annually in the U.S. market – so, more than $1 billion in sales. The most important success factor for us is racing; that is the driving force that pushed us over the years. Building our new North American headquarters in Murrieta was the biggest single investment we’ve ever made. We set a new standard for the whole U.S. market.”

Pierer stated that North America is Pierer Mobility’s most important market, which warranted the $53 million investment in the new headquarters campus.

Pierer Mobility AG purchased KTM out of bankruptcy in 1992, and at the time it had just 160 employees and sold only 6,300 motorcycles that year. Under Pierer’s stewardship, KTM grew slowly but steadily, but in the past decade its growth has accelerated.

In 2013, Pierer expanded its brand footprint by purchasing the legendary Swedish off-road brand Husqvarna from BMW, and in 2019, it acquired the Spanish off-road brand GasGas. Pierer Mobility AG also owns WP Suspension and the Felt and R Raymon bicycle brands.

Related: 2023 Husqvarna Norden 901 Expedition | First Ride Review

In 2022, three decades after Pierer acquired KTM, the KTM Group produced 375,492 motorcycles, an increase of 13% over 2021. Of those, 268,575 (71.5%) were KTMs, 75,266 (20%) were Husqvarnas, and 31,651 (8.5%) were GasGas motorcycles. During the same year, Pierer also produced 118,465 pedal and electric-assist bicycles for its Husqvarna, GasGas, Felt, and R Raymon brands.

Last year, Pierer also acquired a 25% stake in Italian motorcycle manufacturer MV Agusta, and it will provide distribution and marketing support in North America and other markets.

Pierer Mobility AG is very much on the gas, generating revenues of 2.437 billion euros in 2022, a 19% increase compared to 2021. It currently employs 6,000 workers around the globe, including 360 in North America – more than 200 of which are based in Murrieta, California.

John Hinz, CEO of KTM North America, Inc. and Pierer Mobility North America, Inc. was also in attendance at the grand opening, and he called the event a “massive milestone in our company’s history.”

“The campus and our facilities, this represents the single biggest investment by our company,” Hinz said, “so thank you to Mr. Pierer. We designed these buildings for our employees, race teams, athletes, and truly for our dealers across North America to help support our brands and help support sales. This new campus showcases not only the facilities as a tool for our employees and dealers, but it’s our commitment, our dedication, and our investment into the motorcycle and bicycle industry here in North America.”

The new headquarters occupies a 20-acre site that includes three buildings comprising a total of 130,000 square feet. The two-story administrative building includes office and conference space, facilities for dealer and technical training, space for media fleets, and Kiska’s North American design center. The powersports building houses the KTM, Husqvarna, and GasGas factory race teams, WP Suspension, and R&D facilities. A third building serves as a warehouse.

Pierer Mobility also acquired 12 additional acres located adjacent to the new headquarters that have been set aside for future development. The group’s purpose-built private motorsports facility – RD Field – sits one block south of the corporate campus. It includes two supercross test tracks, a hard enduro test track, and a trials competition section for product testing and athlete training.

For more information, visit PiererMobility.com, KTM.com, Husqvarna-Motorcycles.com, or GasGas.com.

Some rides are more challenging than others. Sometimes we seek out the challenge, and sometimes the challenge finds us. It was a little of both when I found myself stopped on the side of the road, trying to stay upright on a Yamaha MT-10 while being battered by 60-mph winds and sandblasted by a dust storm.

It was Valentine’s Day, and I was headed for Las Vegas to attend the AIMExpo dealer show while a winter storm was sending a freight train of frigid air down from the Sierra Nevada mountains. South of me on Interstate 15 in the Mojave Desert, tractor-trailers were being overturned by the wind. I had avoided that route because I’ve ridden it a million times and find it boring, so I was taking a longer, more scenic ride along part of the Eastern Sierra Scenic Byway (U.S. Route 395) and through Death Valley.

Related: 2023 AIMExpo Highlights

While I expected it to be a cold, windy day – and was warmly cocooned in my Zerofit HeatRub baselayers, Gerbing’s 12V heated jacket liner and gloves, and traffic-cone-orange Aerostich R-3 suit – I didn’t anticipate it would be quite this bad. My arms and neck were sore from leaning into the wind for the past couple of hours, and things went from bad to worse after I filled up in Olancha and turned east on California Route 190 across the Owens Valley. The snowcapped Sierras were partly obscured by dusty haze, and soon I became engulfed in a beige cloud and got blitzed by stinging sand.

After a few gusts nearly knocked me off the road, I slowed way down and turned on my hazard flashers. At one point, I stopped on the side of the road to get my bearings near the Olancha Dunes OHV area, with my legs splayed like outriggers and my feet planted firmly on the ground. I didn’t dare get off the bike or it would have toppled over, but I managed to dig my phone out of my pocket to capture a video of the blasting sand starting to cover the road and slamming into me and the bike like millions of miniature BBs.

Once you’re in it, you’re in it. You can either wait it out or proceed with caution.

Sport-Touring on the 2023 Yamaha MT-10

In calmer days last fall, I traveled to North Carolina to attend the press launch for the Yamaha MT-10, a naked sportbike based on the YZF-R1 that was updated with engine refinements, R1-sourced electronics, new styling, and revised ergonomics.

The MT-10’s suck-squeeze-bang-blow comes courtesy of a 998cc inline-Four with a crossplane crankshaft that produces sound and feel like a V-Four, and its aural symphony is amplified by acoustic sound grilles atop the air intakes on either side of the tank.

Related: 2023 Yamaha MT-10 SP | First Ride Review

At the launch, we rode stock MT-10s in the Cyan Storm colorway, which has a mix of gloss black and gray bodywork with bright blue wheels. One of the Yamaha guys rode a Matte Raven MT-10 fitted with factory accessories: Windscreen ($249.99), GYTR Frame Sliders ($209.99), Comfort Seat ($299.99), Rear Rack/Top Case Mount ($250.99), 39L Top Case ($241.99), and Universal Mount ($24.99). After the launch, Yamaha agreed to let us borrow the accessorized bike for an extended test.

The first thing we did was take the MT-10 down to Jett Tuning for a dyno run. Measured where the rubber meets the road, the MT-10’s quartet of 249.5cc cylinders chuffed out 138.5 hp at 10,200 rpm and 76.5 lb-ft of torque at 9,000 rpm. Yes, that’ll do nicely.

Then we flogged it around town and up and down the canyon roads that make Southern California such a land of milk and honey for motorcyclists. The balance and smoothness of an inline-Four is always a delight, but the MT-10’s particular blend of herbs and spices is truly mouth-watering. Twist the throttle hard, and the bike leaps forward, emits a joyful noise, and flashes an amber light as the wheelie control keeps the front wheel close to the ground.

GEAR UP

• Helmet: Schuberth C5 
• Suit: Aerostich R-3 
• Gloves: Aerostich Elkskin Gauntlet
• Boots: Sidi Gavia Gore-Tex 

Have Trunk, Will Travel

Flash forward to my trip in February. The temperatures had been in the 40s all morning, and after making it through the dust storm and climbing out of the Owens Valley, it dropped into the 30s by the time I stopped for a photo in front of the Death Valley National Park sign. It was a Tuesday, and there were few cars on the road – just the way I like it.

No matter how many times I visit Death Valley, I never get tired of it. Covering nearly 5,271 square miles, you could fit Rhode Island and Delaware within its borders and still have 1,237 square miles left over. It’s a place of extremes, contrasts, and wonders. And with nearly 1,000 miles of paved and unpaved roads ranging from tame to intense, it’s a two-wheeled playground.

I savored the long, winding descent into Panamint Valley, enjoyed the sweeping curves up to 4,956-foot Towne Pass, and cruised the 17 miles back down to sea level at Stovepipe Wells in Death Valley. After passing Mesquite Dunes, I was engulfed in another dust storm near the Devil’s Cornfield, where clumps of arrowweed resemble corn stalks. Even though wind was battering me, dust was obscuring the wide-open views that make Death Valley such a unique place, and hours of being cold were beginning to take their toll, it felt good to be hundreds of miles away from my desk.

Related: Nelson-Rigg Commuter Tank Bags | Gear Review

The windscreen provided more protection than the MT-10’s stock flyscreen but not by much. The comfort seat, however, was a huge improvement over the stock seat. It has a flatter shape, more supportive foam, and a suede-like finish. The top case provides 39 liters of lockable storage, and I used it as a solid anchor point for my Nelson-Rigg Hurricane 2.0 Waterproof Backpack/Tail Pack that sat on the passenger seat. For those who want more storage, Yamaha sells a 50L Top Case ($298.99), Side Case Brackets ($249.99), and MT Soft ABS Side Cases ($484.99).

By the time I made it to Las Vegas, the MT-10 no longer looked Matte Raven but a light gray because it was so powdered with dust and grit. In my hotel room, I poured handfuls of sand out of the pockets of my Aerostich suit.

Related: Yamaha Announces 2023 Updated and Returning Models

Cold and Flat

As I wrote about in First Gear last month, it wasn’t just me at AIMExpo. Our dispersed editorial team also came together in Las Vegas, and we enjoyed a group ride to Hoover Dam and Valley of Fire State Park. In the hotel parking garage after the ride, my colleague Kevin Duke pointed out the center of the MT-10’s rear tire was getting thin on tread. Admittedly, of the 2,000 miles on the bike’s odometer, most of them had been ridden with little to no lean angle, but I figured the tire had enough life left to get me home.

From Vegas, I rode north on I-15 to St. George, Utah, where I spent the weekend with my father and stepmother. Wanting to avoid the interstate for the long ride home, Dad helped me plot out a route west through the sparsely inhabited interior of Nevada.

On Presidents Day, I suited up, plugged in my heated apparel, and set off north from St. George on State Route 18, which passes by Snow Canyon on its way to Enterprise. Dawn was just breaking, and it was below freezing – and it stayed that way for the next two hours, mostly down in the 20s. My heated gear did its best to keep up; my core was warm, but my hands, even with the heated, insulated gloves turned to the highest setting, were still cold. The accessory I most wished the MT-10 had was heated grips (Yamaha doesn’t offer them).

After crossing into Nevada, my teeth chattered as I rode over 6,718-foot Panaca Summit, and then I made a brief stop at Cathedral Gorge State Park, which has walls of eroded bentonite clay that look like intricate sandcastles. Continuing southwest on U.S. Route 93, I went from cold to colder over 6,243-foot Oak Springs Summit. At Crystal Springs, I turned onto Nevada Route 375, known as the Extraterrestrial Highway because it passes near Area 51, the infamous secret government facility where there have been reports of UFO sightings.

Nevada is known for its “basin and range” topography, with abrupt changes in elevation as you travel over steep mountains and across wide, flat valleys. I passed over two more of Nevada’s summits – Hancock and Coyote, both around 5,500 feet – before reaching the rundown town of Rachel, home to the Little A’le’inn bar/restaurant/motel, the Alien Cowpoke gas station, and scattered mobile homes.

Other than a few overpriced souvenirs, Rachel didn’t have much to offer. Route 375 passes through vast emptiness, but there was no evidence of Area 51 or anything otherworldly.

My dogleg westward route eventually brought me to the old mining town of Tonopah for gas. I entered California by way of Nevada Route 266, which took me over 7,420-foot Lida Summit, the highest pass of the day.

After crossing the state line, I stopped at a ranch that straddles both sides of California Route 168. Nearly 15 years ago, on a moonless night at that very spot, I crashed a Ducati GT1000. I had no business riding through an open range area after dark, but I had left home late and was on my way to meet my father at the Bonneville Salt Flats. I suddenly came upon a herd of black cows on the road, grabbed a handful of brake lever, locked up the front wheel, and went down.

All things considered, I was lucky. It could have been much worse that night. My apparel was thrashed, but I wasn’t hurt and the bike was rideable. The Swiss Army knife that I carry in my pocket to this day still bears scratch marks from sliding along the pavement during that crash. Had I not stopped this time around to preserve the memory with a photo, I wouldn’t have noticed that the MT-10’s rear tire, with just 2,600 miles on it, was worn down to the cords. Bridgestone Battlax Hypersport S22 tires are marvelously grippy, but they’re not much for longevity.

I rode slowly and gingerly for the next 50 miles, which, regrettably, also happened to be the curviest section of my entire trip. I made it over 6,373-foot Gilbert Pass and 7,271-foot Westgard Pass on my way to Big Pine, a small town that sits in the shadow of the Sierras on U.S. 395. I was safe and sound, but I was 250 miles from home.

Unwilling to risk a catastrophic blowout, I got a motel room and hunkered down. The next day, my dear wife drove up to Big Pine in our 4Runner with a motorcycle trailer and rescued me. It’s not how I wanted the trip to end, but once again, it could have been much worse. Maybe my guardian angel lives at that ranch out on Route 168.

How about a Tracer 10 GT?

The MT-10’s performance, handling, and ergonomics make it a great streetbike, and with some accessories, it makes for a very sporty sport-tourer. In fact, we’d love to see a Tracer 10 GT version with an even taller windscreen, a lower fairing, heated grips, wind-blocking handguards, hard saddlebags, and higher-mileage sport-touring tires. Hey Yamaha, whaddaya think?

See all of Rider‘s Yamaha coverage here.

2023 Yamaha MT-10 Specs

• Base Price: $14,199 
• Price as Tested: $15,477 
• Website: YamahaMotorsports.com 
• Engine Type: Liquid-cooled, transverse inline-Four, DOHC w/ 4 valves per cyl. 
• Displacement: 998cc 
• Bore x Stroke: 79.0 x 50.9mm 
• Horsepower: 138.5 hp at 10,200 rpm (rear-wheel dyno) 
• Torque: 76.5 lb-ft at 9,000 rpm (rear-wheel dyno) 
• Transmission: 6-speed, cable-actuated slip/assist wet clutch 
• Final Drive: Chain 
• Wheelbase: 55.3 in. 
• Rake/Trail: 24 degrees/4.0 in. 
• Seat Height: 32.9 in. 
• Wet Weight: 467 lb 
• Fuel Capacity: 4.5 gal. 
• Fuel Consumption: 36 mpg 

Unlike taking a roadtrip in a car, where you can pack everything but the kitchen sink, traveling by motorcycle requires you to be more selective about what you bring. And whatever is on your “can’t leave home without it” list, you need a way to carry it on the bike. SW-Motech offers a bewildering array of motorcycle luggage in various styles and sizes, along with carriers, racks, and adapters.

These offerings allow for a customizable, modular approach to kitting out your motorcycle, all designed and manufactured with the quality and attention to detail so often attributed to German engineering. SW-Motech also makes all kinds of cool accessories for safety, protection, navigation, and power supply (beware: sitting down with your favorite refreshing beverage and perusing their website will lead to temptation).

Related: New Gear: SW-Motech’s Centerstands

Our 2022 Honda CB500X long-term test bike is an affordable, efficient, light-duty adventure bike that’s perfect for solo touring, but in stock form, it has neither luggage nor a luggage rack. We surfed over to SW-Motech’s U.S. website, entered the year, make, and model into the “My Bike” filter, and clicked the “Luggage” product category.

Related: Motorcycle Camping on a Honda CB500X and Husqvarna Norden 901

First, we wanted a way to carry luggage, so we ordered the Street-Rack ($252.95), a small rear rack with multiple tie-down points that’s made of black PU-coated 5mm aluminum. We only planned to use the Street-Rack as a lashing point and carrier for a tailbag, but SW-Motech also offers a rack extension, tank ring adapters for mounting a PRO tankbag, and a wide range of adapters for various styles and brands of top cases.

Next, we ordered the PRO Side Carrier ($350.95), which is made of black powdercoated 2.5mm steel. Not only is the side carrier compatible with SW-Motech’s own luggage, but adapter kits are also available for use with Givi/Kappa, Hepco & Becker, Krauser, and Shad luggage.

For luggage, we ordered a SysBag WP M (Waterproof, Medium; $249.95) to use as a tailbag and two SysBag WP L (Large; $399.95 each) saddlebags with adapter plates that allow them to be quickly mounted to or removed from the PRO Side Carrier. The SysBag WP L has lashing straps, so if you didn’t want the quick-release adapter plate, the bag alone is $319.95. However, the straps must be threaded through slots in the carrier’s metal plates, so loaded bags would likely move around, especially during off-road riding, which may wear on the straps over time. Given the convenience and added security of the adapter plates, they’re worth the extra money.

Because I was halfway around the world testing the Royal Enfield Super Meteor 650 in India (see my Royal Enfield Super Meteor 650 First Ride review here), our esteemed former EIC and go-to mechanical guru Mark Tuttle was kind enough to tackle the installation in my absence. From his installation notes: “Overall a nice, heavy-duty system that was fairly easy to install with a minimum of fiddling. Took me about two hours, largely because each hanger on the adapter plates must be secured with four @#$%& screws and nuts, or 32 pairs total. SWM should preinstall these. IMHO installing the system is probably best left to the (at least somewhat) mechanically inclined, though the instructions are clear, and it uses high-quality hardware.”

Installation of either the Street-Rack or the PRO Side Carrier requires removing the CB500X’s passenger grab handles, but the side carrier arms can serve as secure handholds for a passenger. Although the instructions call for drilling the rear fender to secure the rear horizontal support arm, Tuttle said it wasn’t necessary; it aligned easily enough with the license plate bracket holes.

A nifty feature of the PRO Side Carrier are Quick-Lock fasteners that allow the carrier to be removed with a quarter turn, leaving behind only minimal attachment points for a clean look. Since the fasteners are immediately behind the loop part of the carrier, securing them with a flathead screwdriver is tricky. However, SW-Motech sells a stainless steel Multitool Key Chain ($11.95) that includes not only a fastener tool for PRO and EVO side carriers but hex keys in five sizes and a bottle opener. If you’re concerned about theft, a Screw Set ($11.95) is available to replace the Quick-Lock fasteners. 

Once the PRO Side Carrier and adapter plates are installed, it’s literally a snap to mount the two SysBag WP Ls to each side – just line up the hangers on the pins, lift the release lever, and pop them right on. The SysBag WP M was laid flat on the passenger seat and Street-Rack, and its straps were used to secure it in place as a tailbag.

The SysBags are made of TPU (thermoplastic polyurethane) with rubber-like EVA (ethylene vinyl acetate) components and thermally welded seams, and they have roll tops made of 210 Ripstop TPU to keep water and dust out. They have reinforced handles, MOLLE patches for attaching accessories, eyelets for cable locks, Velcro fasteners for bundling excess strap lengths, and removable inner pockets. An outer flap covers the roll tops and secures with quick-release buckles, and inside the flap is a zippered pocket. The M bag’s volume is expandable from 17-23 liters, and the L bag’s volume is expandable from 27-40 liters. The L bag also has inner dividers and an easily accessible exterior compartment for stashing raingear, a thermal layer, or other items.

Overall, this is an impressive, high-quality setup that adds up to 103 liters of storage on the Honda CB500X or other motorcycle. One thing to keep in mind, however, is the added weight. The Street-Rack adds 6.2 lb; the SysBag WP L adds 6.4 lb per bag and 3.0 lb per adapter plate, for a total of 18.8 lb; and the SysBag WP M adds 4.2 lb. All in, that’s 29.2 lb before adding any gear.

The total cost of this setup is $1,677.65. Given the quality and versatility, it’s a good investment in a luggage system that will last for years. The only question is, where will you go first? A good place to start is the SW-Motech website.

See all of Rider‘s luggage reviews here.

The first thing you need to know about the Triumph Rocket 3 R is that its inline-Triple displaces 2,458cc (150ci), making it the largest motorcycle production engine by far. Nothing else even comes close. 

The Rocket 3 R’s cylinders are like a hippopotamus’ teeth: It doesn’t have many, but the ones it does have are impressive. They have a bore of 4.33 inches – wider than the cylinders in a 707-hp Dodge Hellcat – and a stroke of 3.4 inches. Each one displaces 819.3cc, exceeding the engine capacity of Triumph’s Street Triple 765 sportbike.

Related: 2024 Triumph Street Triple 765 Range | First Look Review

Claimed output at the crank is 165 hp and 163 lb-ft of torque. You can buy a sportbike tuned to make more horsepower, but no production motorcycle churns out as much grunt. Again, nothing else comes close.

The second thing you need to know is that, despite having such an enormous engine, the Rocket 3 R is not an overweight, bloated machine. With a claimed dry weight of 641 lb and an estimated curb weight approaching 700 lb, it’s as light or lighter than many cruisers and open-class sport-tourers.

Even taking its engine size and output into account, the Rocket 3 R remains a rare breed: a muscle cruiser that handles well and has sportbike-caliber components and electronics. And its design, from its mix of brushed, matte, and gloss finishes to its single-sided swingarm, exhibits incredible attention to detail and top-notch fit and finish.

My, How You’ve Grown 

In the late ’90s and early 2000s, there was a displacement war going on among cruisers, with engine sizes growing from 1,449cc on the Harley-Davidson Twin Cam 88 to 1,510cc on the Victory 92C. Then the Japanese OEMs joined the fray, starting with 1,670cc on the Yamaha Road Star, then 1,795cc on the Honda VTX1800, and finally, breaking the two-liter barrier, 2,053cc on the Kawasaki Vulcan 2000, which debuted for 2004. 

The following year, Triumph came along and topped them all with the Rocket III, which got its thrust from a massive 2,294cc inline-Triple, albeit with an extra cylinder compared to the V-Twins listed above. The Rocket III was under development in the early 2000s, and with each new displacement benchmark, Triumph’s engineers ratcheted up the engine’s capacity because the company’s primary goal was to be the biggest.

Related: 2014 Triumph Rocket III Touring | Road Test Review

The three-cylinder configuration made sense because the modern incarnation of Triumph, under the direction of John Bloor, had built its reputation and brand image around Triples in bikes like the Trophy, Sprint, and Speed Triple. But the origins of the Triple and the model name came from even further back in Triumph’s history: The 1968 Triumph Trident / BSA Rocket III (the same bike with different badging during a time when both brands were under the same umbrella) was the first three-cylinder motorcycle produced by the British manufacturer. Since the modern Rocket III’s engine would be so large, Triumph arranged its cylinders longitudinally rather than transverse to the direction of travel, as on its other Triples.

It’s been nearly a decade since we tested the Rocket III Touring, which was a conventionally styled cruiser with a single round headlight, driving lights, a buckhorn handlebar, top-loading saddlebags, a passenger backrest, and lots of chrome. At 105 hp and 150 lb-ft of torque, it also had a milder state of tune than the Rocket III Roadster, which made 146 hp and 163 lb-ft of torque at the crank. Both bikes were enormous, scaling in at 906 lb for the Touring and 806 lb for the Roadster.

For the 2020 model year, Triumph hit the reset button. It changed the platform’s name to Rocket 3, favoring the more common and contemporary Arabic numeral to its antiquated Roman counterpart. While that may seem like a quibbling distinction, it represented Triumph’s commitment to building a more modern machine. The engine not only grew from 2,294cc to 2,458cc, it was updated with a new crankcase assembly, balancer shafts, and lubrication system. The Rocket 3 was also equipped with throttle-by-wire, an IMU, ride modes, cornering-optimized ABS and traction control, cruise control, hill-hold control, and keyless ignition.

Compared to the previous platform, the Rocket 3 had gone on a crash diet, shaving off roughly 90 lb. Even though the new engine has more displacement, it is 40 lb lighter than its predecessor. More weight was saved by replacing the steel frame and swingarm with cast-aluminum units, lightening the exhaust system and wheels, and reducing fuel capacity from 6.3 gallons on the RIII Roadster and 5.9 gallons on the RIII Touring to 5 gallons on the Rocket 3.

There are two versions of the Rocket 3: the R roadster tested here, which starts at $23,895, and the GT tourer with a small windscreen, more handlebar pullback, forward foot controls, and a passenger backrest, which starts at $24,595. Triumph also produces some limited-edition versions with special paint, finishes, and details, including the Rocket 3 R 221 Special Edition (which celebrates its 221 Newton-meters of torque), the Rocket 3 R Chrome Edition, and the Rocket 3 GT Chrome Edition.

See all of Rider‘s Triumph coverage here.

Triumph Rocket 3 R: A Beauty and A Beast 

Even though the old Rocket III made boatloads of torque, its styling was bland. Its mondo engine, enormous radiator, and 240mm rear tire gave it big-boy presence, but little about the Rocket III said, “Hey, look at me!” A cruiser should not only make generous low-end torque, it should also make a statement, and the Rocket 3 R certainly does that. 

It’s a muscle bike with a muscular stance, sitting on fat tires – 150/80-17 up front, 240/50-16 out back – and covered in a wide array of metallic surfaces, as if the entire bike were carved from one big block of metal. The effect is even more pronounced with the Matte Silver Ice paint on our test bike (other color options are Sapphire Black, Phantom Black, Korosi Red, or Silver Ice/Cranberry Red). On the right side is a stunning hydroformed triple-exhaust header that ends in short, matte-black silencers with slash-cut chrome end caps – two on the right side and one on the left.

There is nothing clunky or out of place – no unsightly hoses or wires, no half-baked compromises. The “Rocket 3 R” and “2500 cc” badges are engraved; the matching fuel, radiator, and oil filler caps are brushed aluminum; and even the bar-ends have custom detailing. The coolest styling element, and the one I bragged about to everyone that asked about the bike (it’s a lookie-loo magnet), are the double-hinged, fold-away passenger pegs. 

If there’s one thing that looks a little off to me, it’s the dual round headlights. They’ve been a signature Triumph styling element since the ’90s, most notably on the Speed Triple, and they were on the Rocket III Roadster. But with the more modern look of the Rocket 3 R, just as Triumph did with the Speed Triple about a decade ago, evolving the headlights into a more aggressive shape would make the bike’s overall appearance more cohesive. 

Hitting the starter button on the Rocket 3 R elicits an authoritative growl, and blipping the throttle at idle causes the entire bike to twist to the right due to its big, longitudinal crankshaft. Perhaps to make the bike more livable, throttle response is a tad dull below 2,000 rpm, but once the big pistons spin up more, the well of grunt feels bottomless. On Jett Tuning’s dyno, the 2.5-liter beast spun the drum to a peak of 148 lb-ft of rear-wheel torque at 3,900 rpm, with more than 140 lb-ft on tap between 2,500 rpm and 5,300 rpm (redline is 6,500). There’s hardly a ripple in either the torque or horsepower curves, with the latter climbing steadily from 47 hp at 2,000 rpm to a peak of 145 at 6,100 rpm. Power is sent to the rear wheel through an enormous driveshaft.

While the 6-speed transmission with torque-assist clutch shifts cleanly without any big cruiser clunkiness, this is not a bike that requires much rowing through the gearbox. Short shift your way up to top gear, and the big mill spins only about 3,200 rpm at 75 mph. On a twisty backroad, just put it in 3rd and forget about it – there’s always enough grunt to pull you out of corner and catapult you toward the next one. And when a long straight stretch opens up, grab a handful and hang on – it’s an experience you won’t soon forget and will be eager to repeat. 

The Rocket 3 R is the physical embodiment of badassery. Until you beep the horn. Then it sounds like a Vespa. Even by motorcycle standards, the horn is wimpy. 

The Triumph Rocket 3 Can Bend It Like Beckham 

Motorcycles with ultra-wide 240mm rear tires aren’t typically known for their cornering prowess because it takes effort to get the bike over onto the side of the tire. But Triumph worked with Avon to develop the profile of the Rocket 3 R’s Cobra Chrome tires to ensure their profiles resulted in fairly neutral handling. For a big, long bike, the R3R goes around corners remarkably well, requiring less steering effort than one might expect. 

Helpful in this respect is adjustable Showa suspension with damping that’s more sporting firm than touring soft. There’s enough suspension travel to absorb the worst of big hits, but ride quality generally favors smooth roads over bumpy ones. Slowing things down is a trio of top-shelf Brembo Stylema 4-piston radial monoblock calipers – two in front pinching 320mm discs and one out back pinching a 300mm disc – with hydraulic fluid pumped through steel-braided lines. They’re serious anchors that offer outstanding stopping power with precise feel at the lever. 

Gear Up:

• Helmet: Arai Defiant-X 
• Jacket: Joe Rocket Classic ’92 
• Gloves: Joe Rocket Cafe Racer 
• Pants: Scorpion Covert Ultra Jeans 
• Boots: Fly Racing Tradesman 

Deux Ex Machina 

When the Rocket 3 R is keyed on, its color TFT display shows the Triumph logo and a message that says, “Welcome Rider.” Always puts a smile on my face. 

I parked the Triumph in the garage at LAX airport during a short trip, and when I returned, I pulled the keyless fob out of my backpack and pressed the bike’s power button. A small red light came on, which means the fob isn’t within range or isn’t working. It was 11 p.m. and raining, and I still had an hour’s ride ahead of me. I held the fob close to the bike and pressed the power button again and again, but no luck. 

As panic started to set in, I imagined the Rocket 3 R as HAL 9000 from 2001: A Space Odyssey: “I’m sorry, Greg, but I’m afraid I can’t do that.”

Turns out I’m a moron. What I didn’t know is that, to save its battery, the fob goes to sleep. And to wake it up, you must press a button on the fob. But there’s not an obvious button, just an embossed Triumph logo.

During my Uber ride home, I sent a grumpy email to Adam VanderVeen, Triumph America’s marketing director, asking for help. I’m sure he laughed to himself as he composed a diplomatic reply informing me that, in fact, the logo is the button, and when you press it, a green light comes on to let you know the fob is sending signals to the bike.

After bumming a ride back to LAX the next day, I pressed the logo-button-thingy, and the Rocket 3 R powered right up. I was relieved that the start-up message did not say, “Welcome Dum Dum.”

Like other Triumphs we’ve tested in recent years, the Rocket 3 R’s electronics package is comprehensive and easy to use, aided by a TFT display with intuitive graphics. Select from one of the three standard ride modes (Sport, Road, Rain) or customize your own (Rider – there it is again, if only they used the Rider logo!), and rest assured that the ABS and TC are lean-angle sensitive, just in case. 

Rocket Man

As the saying goes, we buy on emotion and justify with logic. The Triumph Rocket 3 R is all about heart-pumping stimulation. It’s the sort of bike you lie awake at night and think about, triangulating a plan to get one into your garage. Just as Sméagol was corrupted by the Ring, the Rocket 3 will take over your thoughts and make you do naughty things. If you want to be King of the Road, there’s nothing else like it.

2023 Triumph Rocket 3 R Specs

• Base Price: $23,895 
• Price as Tested: $24,425 (Matte Silver Ice) 
• Warranty: 3 yrs., unltd. miles 
• Website: TriumphMotorcycles.com 

Engine 

• Type: Liquid-cooled, transverse inline-Triple, DOHC w/ 4 valves per cyl. 
• Displacement: 2,458cc 
• Bore x Stroke: 110.2 x 85.9mm 
• Compression Ratio: 10.9:1 
• Valve Insp. Interval: 20,000 miles 
• Fuel Delivery: EFI w/ throttle-by-wire 
• Lubrication System: Dry sump, 5.5 qt. cap. 
• Transmission: 6-speed, hydraulically actuated slip/assist wet clutch 
• Final Drive: Shaft  

Chassis 

• Frame: Cast aluminum main frame w/ cast aluminum single-sided swingarm 
• Wheelbase: 66 in. 
• Rake/Trail: 28 degrees/5.3 in. 
• Seat Height: 30.4 in. 
• Suspension, Front: 47mm inverted fork, adj. compression & rebound, 4.7 in. travel 
• Rear: Single shock, fully adj. w/ remote preload adjuster, 4.2 in. travel 
• Brakes, Front: Dual 320mm discs w/ 4-piston radial monoblock calipers, ABS 
• Rear: Single 300mm disc w/ 4-piston radial monoblock caliper, ABS 
• Wheels, Front: Cast aluminum, 3.50 x 17 
• Rear: Cast aluminum, 7.50 x 16 
• Tires, Front: 150/80-R17 
• Rear: 240/50-R16 
• Dry Weight: 642 lb 
• Load Capacity: 458 lb 
• GVWR: 1,100 lb 

Performance 

• Horsepower: 145 @ 6,100 rpm (rear-wheel dyno) 
• Torque: 148 lb-ft @ 3,900 rpm (rear-wheel dyno) 
• Fuel Capacity: 5.0 gal 
• Fuel Consumption: 30 mpg 
• Estimated Range: 150 miles 

To stay current with the latest technology and ahead of the competition, KTM has been on a two-year development cycle with its middleweight Adventure platform. The KTM 790 Adventure and 790 Adventure R were launched for 2019, then they evolved into the KTM 890 Adventure and 890 Adventure R for 2021, and now we have updated versions for 2023. 

KTM unveiled the 2023 version of the more off-road oriented 890 Adventure R at its Adventure Rider Rally in Idaho last September, and the 2023 KTM 890 Adventure was announced two months later. The standard model and the R are mostly the same, differing only in terms of suspension, tires, seats, windscreens, and color/graphics.  

Related: 2021 KTM 890 Adventure R | Long-Term Ride Review

When the platform debuted for 2019, KTM said the 790 Adventure was designed to be the most off-road capable touring bike and the 790 Adventure R was designed to be the most touring-capable off-road bike. They were head and shoulders above anything else in the category, and they shared Rider Magazine’s 2019 Motorcycle of Year award. 

KTM has continued its two-pronged approach. To handle its more rugged mission, the 890 Adventure R is equipped with higher-spec WP XLPOR suspension, which mostly accounts for its higher price ($15,199 versus $13,949 for the standard model tested here). It also has Mitas Enduro Trail+ tires, a single-piece seat perched 34.6 inches off the ground, a short windscreen, and rally-inspired graphics. 

At the press launch for the 890 Adventure in Obidos, Portugal, KTM representatives said that many customers end up buying the R over the standard model because they perceive the higher-priced one as being the better of the two. But it really comes down to where and how someone rides. If they spend most of their time on the road with occasional forays in the dirt, if their off-road riding style is more exploratory than aggressive, and if they tour with a passenger, the standard model is a better overall fit. 

Related: 2023 KTM 890 Adventure R | First Look Review

In that vein, KTM made the 890 Adventure more off-road capable without sacrificing its street manners or road-going comfort. New damping settings for its WP APEX suspension are less sporty, geared more toward touring comfort with or without a passenger and compliance on rough off-road terrain. The fully adjustable 43mm inverted fork has an open-cartridge design with compression in the left leg, rebound in the right leg, and new finger-turn adjusters on the fork caps. The Progressive Damping System rear shock is adjustable for rebound and preload, with an adjuster knob for the latter under the left side of the seat. The 890 Adventure has 7.9 inches of suspension travel front and rear, 9.2 inches of ground clearance, and 21-inch front and 18-inch rear wheels. 

On the technology front, there’s a new ABS unit that works in conjunction with the 6-axis IMU, and as before, there are two ABS modes: Road (full intervention front and rear, lean-angle sensitive) and Offroad (less intervention at the front, no intervention at the rear, and no compensation for lean angle). Also unchanged are the three standard ride modes (Street, Rain, and Offroad) and an optional Rally mode, all of which adjust throttle response, power, and MTC (Motorcycle Traction Control). 

In the past, a rider had to select ABS mode and ride mode separately. On multiple occasions on previous models, I’ve switched over to an off-road mode, headed down a trail, and only then realized I was still in Road ABS mode. Now, when either Offroad or Rally mode are selected, Offroad ABS is automatically selected, while Road ABS is the default for Street and Rain modes. 

Gear Up:

• Helmet: Arai XD-4 
• Jacket: Fly Racing Off Grid 
• Gloves: Fly Racing Surveyor 
• Pants: Fly Racing Terra Trek 
• Boots: Fly Racing Milepost 

A new feature on several 2023 KTM models is Demo mode, which allows a new owner to use and evaluate optional electronic upgrades for 1,500 km (932 miles) before paying for them. After the distance limit has been reached and the bike is keyed off, the options are deactivated. The owner then has the option to return to the dealer to pay for them to be reactivated. On the 890 Adventure, those options include Rally mode, Motor Slip Regulation (MSR), Quickshifter+, and cruise control, which can be purchased individually or all together as part of the Tech Pack ($549.99).  

There’s also an upgraded 5-inch TFT display with new graphics, a more intuitive menu system, and color-coded pictograms of the bike – when ABS is turned off at the rear wheel, for example, it changes from green to red. With the optional Rally mode, there’s a high-contrast, minimalist Rally display that shows the slip-adjust setting, which can be changed on the fly via the up/down arrows on the switchgear. An optional connectivity unit allows the bike to be paired to the KTMconnect app via Bluetooth, which enables Turn-by-Turn+ navigation as well as music and calling functions when connected to a helmet communicator. A new call-out function lets riders create a favorites list of 10 phone numbers for quick access. 

See all of Rider‘s KTM coverage here.

To underscore the 890 Adventure’s newfound off-road worthiness, at the press launch, KTM organized a challenging route near the coast of Portugal. It was a winter day that started off cold, foggy, and damp. Our ride leader was Giacomo Zappoli, KTM’s Product Marketing Manager Offroad & Travel, a young, energetic Italian who has competed in hard enduros and rally raids. After just a few miles of wet pavement, we turned onto a rough gravel road riddled with roots, ruts, and puddles, and before I had even gotten my “dirt legs,” we were throttling our way through deep sand. Alrighty then, game on. 

Throughout the day, we switched frequently between paved and unpaved surfaces. The asphalt ranged from wet to dry, flat to curved, and rural to urban, along with some sketchy roundabouts. The off-road terrain included loamy single-track winding through trees, dodgy farm roads lined with ancient stone walls, packed-down gravel on a 6th-gear ridgeline dotted with wind turbines, and even a shortcut between paved sections that had us roosting our way through a small garbage dump. The variety provided the perfect opportunity to test every ride mode repeatedly in its intended environment, and the automatic selection of the appropriate ABS mode meant there was one less thing to worry about. 

The 890’s softer suspension settings felt spot-on for the variable terrain, and the new Pirelli Scorpion Rally STR tires, which have a roughly 70/30 on/off-road ratio compared to the 90/10 ADV tires on the previous model, were appreciated. Countless rocks pinged off the beefier aluminum engine protector, which also covers the front and sides of the lower fuel pods on the horseshoe-shaped fuel tank. The tank’s design, introduced on the 790, carries most of the fuel down near the rider’s feet, reducing the bike’s center of gravity for better handling. 

Though unchanged for 2023, KTM’s 889cc LC8c parallel-Twin remains a compact, well-balanced, lively engine. When we put a 2021 890 Adventure R on Jett Tuning’s dyno, it made 90 hp at 8,200 rpm and 62 lb-ft of torque at 6,200 rpm at the rear wheel. The ride modes allow the engine’s character to be tailored to conditions, and the Twin’s flexibility, responsiveness, and auditory rumble are well-suited to an adventure bike that will be pressed into different roles and provide enough excitement to keep things interesting. 

Inspired by the KTM 450 Rally – which clinched the top two positions in the 2023 Dakar in the hands of Kevin Benavides and Toby Price – the new bodywork on the 890 Adventure has a more integrated front fairing that includes larger tank and side panels. The connection between the fairing and the frame now uses two forged aluminum components, providing additional strength as well as more load-bearing capacity for large GPS devices (there are USB and 12V outlets on the dash). The new windscreen is taller, has a steeper pitch, and includes a vertical lip at the top, as well as an opening in the center that reduces buffeting at high speed. Wind protection and airflow were noticeably improved, and the taller screen didn’t interfere with terrain reading during tricky off-road sections. 

Comfort was further enhanced with an extra 0.4 inch of foam in the seat, which increases the height of the dual position seat by the same amount to 33.1/33.9 inches. To compensate for the added height, the seat has been made narrower in the front to make the effective stand-over height roughly the same. Since I have a 34-inch inseam and ample curb weight of my own, I appreciated the seat’s additional support but did not mind the extra height, even in the higher setting with rear preload cranked up a bit. Lower seats and a lowering kit are available as accessories. 

Our test ride on the 890 Adventure certainly lived up to the bike’s name. I made heavy use of the brakes as I adapted to the rapidly changing conditions – both the front lever and rear pedal were easy to modulate – and the ABS intervention did its job without fail. Late in the day, as the hide-and-seek sun had dried out the pavement and we did our best to keep up with Zappoli on a particularly serpentine stretch of road, I gassed it exiting a corner and felt the rear step out. Before I could even think “Oh, sh…!” the TC light flashed and the moment passed. 

Back at the hotel, my fellow North Americans and I went directly to the bar; we did not pass Go and we did not collect $200. We ordered tall glasses of beer, toasted each other, and recounted highlights of the day. We had been out in the elements, challenging ourselves, exploring a new area, and having fun. That’s what adventure is all about. 

2023 KTM 890 Adventure Specs

Base Price: $13,949 

Price as Tested: $14,499 (Tech Pack) 

Website: KTM.com 

Warranty: 2 yrs., 24,000 miles 

Engine Type: Liquid-cooled, transverse parallel-Twin, DOHC w/ 4 valves per cyl. 

Displacement: 889cc 

Bore x Stroke: 90.7 x 68.8mm 

Horsepower: 105 @ 8,000 rpm (factory claim) 

Torque: 74 lb-ft @ 6,500 rpm (factory claim) 

Transmission: 6-speed, cable-actuated slip/assist wet clutch 

Final Drive: X-ring chain 

Wheelbase: 59.4 in. 

Rake/Trail: 25.9 degrees/4.2 in. 

Seat Height: 33.1/33.9 in. 

Wet Weight: 474 lb (claimed) 

Fuel Capacity: 5.3 gal 

Fuel Consumption: 52.3 mpg (claimed) 

We’ve all seen the commercials where the Most Interesting Man in the World says, “I don’t always drink beer, but when I do, I prefer Dos Equis.” Likewise, Arai doesn’t often release a new helmet, but when it does, it gets it right. More than 70 years of experience went into the development of the new Arai Contour-X. 

As we’ve written about in previous reviews and in our “The Why Behind Arai Helmets” feature, Arai maintains a steadfast commitment to building helmet shells with a smooth, strong, round shape. As repeated experience among MotoGP, World Superbike, and other racers has shown, Arai helmets are designed to “glance off” objects, allowing them to maintain sheer integrity, resist deformation, and spread impact energy over the widest possible area. Every exterior feature of an Arai helmet is designed to break away so that the helmet itself will not catch on anything during an impact or slide. 

The Contour-X offers excellent protection, comfort, ventilation, and aerodynamics. It features a new Peripherally Belted Complex Laminate Construction (PB-cLc2) shell that’s thinner and lighter thanks to a new fiber material and resin, yet it is just as strong as other Arai shells. The medium-size Contour-X tested here, even with the optional Pro Shade visor and Pinlock anti-fog insert installed, weighs just 3 lb, 9 oz – the same weight as the top-of-the-line Corsair-X. 

Related: Arai Corsair-X Helmet | Gear Review

Like the Regent-X, the Contour-X’s shell flares out 5mm around the opening to make the helmet easier to slide on and off. The bottom of the shell also features Arai’s Hyper Ridge, which improves strength and shock absorption and was reshaped for flatter sides to facilitate easy mounting of a comms system. 

Related: Arai Regent-X Helmet | Gear Review

Arai helmets have always been a pleasure to wear, and the Contour-X goes even further with a new odor-resistant, brushed-nylon interior that’s removable and washable and features adjustable Facial Contour System (FCS-2) cheek pads that can be released to ease removal during an emergency. Inside, there are speaker pockets and a new neck-roll wire pocket for a comms system. Through short rides, long rides, and repeated donning and doffing, the Contour-X required no break-in and was comfortable at all times. 

Ventilation is fantastic. The new system includes a total of seven intakes, all of which can be closed as needed: a 3D Arai logo vent in the forehead, two F1-derived tear-drop intakes on the crown, two brow vents in the faceshield, and a chin vent. There are also six exhausts: one in the spoiler, two on the sides near the back, and three in the neckroll area. Arai says the Contour-X offers better ventilation than the Corsair-X at street speeds, and I concur. 

See all of Rider‘s motorcycle helmet reviews here.

The round shape of Arai helmets helps them slip through the air smoothly, and the new XGR exhaust/spoiler pulls hot air out of the helmet while also enhancing stability and reducing buffeting at speed. I wore the Contour-X on a variety of bikes with and without windscreens, and it remained steady and comfortable. 

The Arai Contour-X is a fantastic lid in every respect. It’s available in sizes XS-2XL, and pricing starts at $739.95 for five different solid colors (Blue Frost, Black Frost, Diamond Black, Diamond White, and Light Grey) and $889.95 for two graphic options (Snake Red and Face Fluorescent Yellow).

Every international motorcycle tour is special, but none is as memorable as your first one. For my wife, Carrie, and me, our first international tour was in 2010 – a two-week tour of Spain and Portugal with IMTBike, a motorcycle tour and rental company based in Spain with office locations in Madrid, Barcelona, Bilbao, Málaga, and Lisbon, Portugal.

Carrie and I have had the good fortune to go on many international motorcycle tours together. Riding two-up, mostly on a big BMW GS, we’ve explored a dozen countries in Europe, as well as Canada and Ecuador. We got engaged at the top of Stelvio Pass in the Alps and spent our honeymoon on a tour in Norway. But for that first tour, our guides were Scott Moreno, IMTBike’s founder and CEO, and “Super” Chano Lorenzo, IMTBike’s longest serving guide, who’s been with the company since 1998.

Related: Scott Moreno: Ep. 30 Rider Magazine Insider Podcast

Like old friends, Scott and Chano shared their unabashed love and deep knowledge of Spain and Portugal with everyone in our group, treating each one of us as special and taking time to get to know us so they could tailor the tour experience to our particular needs or desires.

Wake-Up Call

Of all the tours Carrie and I have been on, our most embarrassing moment happened on Day 1 of that first tour in 2010 – before we had even gotten on the bike. While enjoying ourselves at the festive welcome dinner the night before, we imbibed a bit too much vino tinto. When we got back to the hotel, feeling the effects of jetlag and the wine, we decided to wake up early to pack and get ready for the tour. I set my alarm, and we went to bed.

With the curtains drawn to block out the city lights of Madrid, I was jolted awake by the phone. It was Chano. “Buenos dias, Greg! It’s nine o’ clock, and everyone is on the bus, waiting to go. Are you ready?”

Mierda! I had gotten the a.m./p.m. mixed up on my phone’s alarm.

“I’m soooooo sorry! We overslept!”

“Don’t worry, that means you were relaxed! Scott will head over on the bus with the others and start the bike handover. I’m downstairs with everyone’s luggage in the van. I’ll wait for you.”

Hungover with throbbing headaches, our pulses racing, we threw everything into our luggage and suited up in our riding gear as fast as we could. Carrie and I are both fastidious Type A people, and we hate being late. We did the walk of shame out to the van, only to find Chano with a big smile on his face as he reassured us, “Is no problem!”

And it wasn’t. As embarrassed as we were, Chano and Scott just rolled with the situation. Our blunder was the source of playful ribbing throughout the tour, an inside joke we still share to this day. And we learned our lesson – in nearly 100 days we’ve spent on overseas motorcycle tours since that first morning, we have not been late once, and we’re often the first people on the bikes in the morning, ready to go.

A Very Good Year

Like all motorcycle tour companies, the pandemic was a gut punch to IMTBike. Covid restrictions meant the company couldn’t run tours for more than a year, but Moreno kept his team on the payroll, and they used the downtime to refresh, refine, and expand their tour offerings. IMTBike specializes in tours of the Iberian Peninsula (Spain and Portugal), but it also offers tours in France, Italy, the Alps, and Morocco, as well as MotoGP tours (Catalunya, Jerez, and Valencia) and tours in Turkey, Thailand, Japan, and New Zealand.

IMTBike resumed its tours in 2021, the same year it earned a coveted Tripadvisor Travelers’ Choice Best of the Best award. In 2022, IMTBike celebrated its 25th anniversary, and Scott personally invited Carrie and me to join him and Chano on the Southern Spain Andalusia tour.

Related: Perfect Pyrenees Tour with IMTBike

Amazing Andalusia via IMTBike

As much as we were looking forward to getting the band back together for a reunion tour, a family emergency precluded Scott from joining us. Chano served as head guide, and our consolation prize was Paolo Pezzoli, a young, energetic Italian who was new to the IMTBike team.

The Southern Spain Andalusia tour hits the sweet spot – not too short or too long, not too easy or too challenging, and just right in terms of daily mileage, choice of roads, scenery, sightseeing, and accommodations. The tour is nine days, with six riding days, one rest day, and travel days on each end. It starts and ends in Málaga, a city on Spain’s Mediterranean Costa Del Sol (Sun Coast), and includes stops in Granada, Córdoba, Seville (rest day), Arcos de la Frontera, and Ronda.

Carrie and I arrived a day early to shake off our jetlag and spend a day exploring Málaga, which was founded in 770 B.C. and is one of the oldest continuously inhabited cities in the world. IMTBike booked a modern, stylish hotel that’s a short walk to the heart of the city. We visited the 19th-century Atarazanas Market, the 14th-century Cathedral of Málaga, and the 11th-century Alcazaba, a Moorish palatial fortress perched on a hill overlooking the city and coast.

After our walking tour – which included a stop at a busy sidewalk cafe for tapas, sangria, and people-watching – we met the tour group in the hotel’s bar. Over beers and wine, we met Lonny and Linda, a couple from Idaho; Kobus and Magda, a couple from South Africa; Bernard, a solo rider from Canada; and Oliver, a solo rider from Dominican Republic. Each of us took turns telling the group a little about ourselves, and Chano gave us an overview of the tour and rules of the road in Spain.

To keep us connected, IMTBike set up a group on WhatsApp so we could send text messages, live locations, photos, and more via Wi-Fi. We also received links to the tour’s daily routes on Google Maps and to a Google Drive folder so we could upload and share our photos.

Following the briefing, we walked to dinner. Spain is known for its afternoon siestas and late-night dinners, and in the evenings, the streets of cities we visited were bustling with locals and tourists, young and old and everything in between. Our tour was in October, with mild days and cool nights – ideal for strolling on cobblestoned and tiled sidewalks that are hundreds of years old, their surfaces worn smooth by millions of footsteps. Our welcome dinner was at a restaurant handpicked by IMTBike, and Chano got us started by ordering Iberian ham, cheese, and wine for the table. Everyone was in good spirits as we broke bread and got to know each other.

Up, Up, and Away

Carrie and I woke up early, enjoyed a decadent breakfast at the hotel, brought our luggage down, and walked outside to find two R 1250 RTs, three R 1250 GSs, and an F 850 GS lined up on the sidewalk. IMTBike is an official partner of BMW Motorrad, and it owns the world’s largest fleet of BMW motorcycles (more than 200 at last count). Bikes available to rent range from the G 310 R to the K 1600 GT, and all are outfitted with a top case and side cases; a GPS unit is optional. Our group was followed by a support van that carried luggage and a spare bike.

On our first tour in 2010, Carrie and I described Spain as “California with castles.” The coastal areas of Southern Spain and Southern California have mild Mediterranean climates as well as rugged mountains that rise dramatically from the sea. Within minutes of leaving Málaga, we climbed up, up, up into the mountains on a tight, steep, endlessly curving road that kept us on our toes. After a midmorning coffee stop, we rode back down to the coast to have delicious paella right next to the beach. We ascended into the mountains again on a narrow lane carved into the rock known as the “Goat Road,” arriving in Granada in time to explore the city’s old quarter before meeting up for a gourmet dinner at one of the best restaurants in the city.

From Granada, we got full use of our tires and leaned deeply through the curves of a shaded canyon before popping out into the high plains, where we got a bird’s eye view of the village of La Peza from an overlook. We rode through endless olive groves and visited the Núñez de Prado organic olive oil factory in Baena, where the olives are crushed by enormous stone mills to extract the “flower” and first cold pressing of extra virgin olive oil.

After lunch in the Baena town square, we rode to Córdoba, home to more UNESCO World Heritage Sites than any other city. It was a hot afternoon, so we cooled off in the rooftop pool overlooking the Guadalquivir River and the city. We explored the narrow, cobblestoned streets and visited the stunning Mosque-Cathedral of Córdoba. At an outdoor cafe, Carrie and I joined Lonny and Linda for sangria, and then we enjoyed a family-style dinner with the group at a local restaurant.

On our third day, we rode from Córdoba to Seville on a series of backroads that seemed tailor-made for motorcyclists. Spain is a motorcycle-mad country, and you can’t help but think that civil engineers said to themselves, “Let’s make these curves flow with a nice rhythm. We’ll give them a consistent radius, good banking, and smooth pavement. Riders will love it!”

After winding through farmland with rolling hills filled with oak and cork trees, herds of sheep, and black Iberian pigs (the source of highly prized jamón pata negra), we rode over the Sierra Morena mountains and back down into the Guadalquivir River valley and the magnificent city of Seville.

We arrived with a few hours to unwind, relax, and explore before dinner. We walked from the hotel to an old restaurant decorated with bullfighting memorabilia, and we enjoyed vino tinto and plates of jamón, queso, ensalada mixta, and other delicacies, all topped off with a variety of diet-busting sweets and little glasses of house-made liqueur.

Caves, Coffee, and Cava … IMTBike Style

After a rest day exploring the wonderful city of Seville and a mesmerizing flamenco show, we continued our meandering lap around Andalusia. We rode through rolling hills of olive trees and passed several of the region’s iconic Pueblos Blancos (White Towns), where all the houses and buildings have whitewashed walls and terra cotta tile roofs. We stopped for lunch in Setenil de las Bodegas, a town built along a small canyon with houses and shops built into the hollowed out limestone caves on both sides of the river.

Next up was the most impressive road of the trip, an Alps-like climb from the valley to 4,452-foot Palomas Pass. We descended an equally winding and scenic road and made our way to Arcos de la Frontera, an old town built high on a limestone promontory. De la Frontera means “on the frontier,” so named because Arcos was on the frontlines of Spain’s 13th-century battle with the Moors. Perched on the edge of the cliff overlooking the Guadalete River, our hotel was a Parador, one of roughly 100 hotels managed by Spain that are in buildings of historical, artistic, or cultural interest.

Leaving Arcos de la Frontera, we rode under the flying buttresses of the cathedral and descended steep, narrow cobblestone streets made damp by overnight rains. We continued our ride along La Ruta de los Pueblos Blancos (Route of the White Towns) where whitewashed villages on the mountainsides stand out like large polka dots on the green landscape. We rode into Sierra de Grazalema Natural Park and wound our way up to El Boyar Pass on our way to our morning coffee stop in a bustling town square.

Every day, we rode up and down on small mountain roads and through idyllic agricultural plains. Traffic was minimal, and the rugged, old-world scenery was enchanting. On our fifth riding day, we enjoyed more fast and fun roads in the afternoon as we made our way to Ronda, a city perched high on both sides of the Tajo gorge carved by the Guadelevin River. We stayed in a Parador on the edge of a cliff overlooking the “new” 300-year-old bridge over the gorge (the old bridge was built during the Roman Empire).

We started our last day of the tour with a beautiful sunrise over Ronda. We rode east into the rugged granite mountains of Sierra de las Nieves Natural Park, winding our way through canyons and over passes toward El Burgo.

It was Saturday, and we stopped for coffee at a popular meet-up spot for motorcyclists, its tables abuzz with riders and its parking lot full of bikes. The final highlight of the tour was a ride up to El Torcal de Antequera, a mountain ridge covered in unusual karst rock formations that reminded us of Joshua Tree National Park seen through the eyes of surrealist painter Salvador Dalí.

We descended more narrow, twisty roads back to Málaga, where we turned in our BMWs at IMTBike’s warehouse and toasted a celebratory glass of cava. After drinks and laughs on the hotel’s patio, we enjoyed a festive farewell dinner at another wonderful restaurant.

The week went by fast, a sure sign of how much fun we had. Chano and Paolo were a constant source of charm and good humor, and they did a lot of work behind the scenes to keep everything running smoothly. Our small group bonded quickly, and even months after the tour, we still send messages via WhatsApp to stay in touch.

If you love good roads, good food and wine, and nice accommodations, as well as history, architecture, and rugged mountain scenery, this tour is for you. Just try not to oversleep.

The 2023 Southern Spain Andalusia tours run March 11-19, April 15-23, and Oct. 14-22. Visit the IMTBike website for more info.

The Continental RoadAttack series are sport-touring tires that strike a balance between performance and longevity. They’re ideal for sport-tourers, standards, street-biased adventure bikes, and moderately powered sportbikes.

See all of Rider‘s tire reviews here

The Evolution of Continental RoadAttack Tires

With each generation from Continental, the carcass, compound, profile, and tread design have evolved. When the first RoadAttack debuted in 2005, it introduced Continental’s ZeroDegree belt, a continuous steel wire that runs radially around the tire carcass in the same direction as travel, which enhances stability.

In 2010, the RoadAttack 2 introduced TractionSkin, Continental’s proprietary “pre-scrubbed” tread surface that doesn’t require slippery mold-release agents and all but eliminates a break-in period for the tires. The RoadAttack 2 also featured MultiGrip, whereby a single compound is heat-cured in a progressive fashion to provide better wear in the center of the tire and more flex and better grip on the shoulders. MultiGrip provides a smooth transition between zones rather than the abrupt transition that can occur with multi-compound tires.

In 2013, the RoadAttack 2 Evo featured RainGrip, a high-silica compound designed to deliver optimal performance in wet conditions. Four years later, the new RoadAttack 3 came with EasyHandling, a specialized alignment between the contours of the front and rear tires said to result in neutral handling behavior, especially in hairpins and during slow cornering.

All these technologies go into the new RoadAttack 4, with the addition of Continental’s latest trick: GripLimitFeedback. The unique combination of the tire’s carcass construction and tread compound provides improved feedback to the rider when the tire approaches its traction limit.

The RoadAttack 4 features a new compound and an updated tread pattern that, according to Continental, boosts wet weather performance, offers faster warm-up times in cold and wet conditions, and provides dry grip on par with many sport tires.

A new silica-rich compound improves wet grip without sacrificing mileage, a new blend of resins makes the tire more sticky even when cold, and the entire rubber stew has been optimized for use with modern ABS and traction control systems. Continental describes the RoadAttack 4 as a “hyper-touring” tire intended for today’s 150-plus hp sport-tourers, adventure tourers, and sportbikes.

Where the Rubber Met the Road

To test some of those claims, Continental invited us to the BMW Performance Center in Greer, South Carolina, which is across the street from the factory where all BMW X-Series SUVs are built. The Performance Center offers automotive and motorcycle training, and the grounds include a closed-course circuit, a large skidpad, and various off-road obstacles and trails.

A wide range of BMW motorcycles were fitted with RoadAttack 4 tires. I saddled up on an F 900 R, which has an 853cc parallel-Twin that, based on our last test in 2020, makes 88 hp and 58 lb-ft of torque at the rear wheel.

Related: 2020 BMW F 900 R and F 900 XR | Road Test Review

BMW’s instructors started us off with some basic exercises, such as a slow ride using just the clutch to control speed, as well as fast and slow cone weaves. We moved on to swerving and braking exercises at speed, and I quickly gained an appreciation for the RoadAttack 4s’ grip and handling.

When we were instructed to accelerate from a dead stop to 30 mph, pass between two cones, and then close the throttle and apply maximum braking, the F 900 R came to a quick halt. When our target speed was increased to 50 mph, I neglected to stand on the rear pedal when I grabbed a handful of front brake lever. The F 900 R has ABS, but I was in Dynamic mode, which reduces intervention at the front wheel. The front tire provided reassuring grip as the back wheel raised up into a graceful, unintentional stoppie, the likes of which I’ll probably never replicate.

In the afternoon, we embarked on a spirited ride on cold, damp backroads, and we ended the day with a game of cat and mouse on the track, where we pushed the tires to their limits. Regardless of conditions, the RoadAttack 4s warmed up fast, provided confident handling on a variety of road surfaces, and clung tenaciously to the tarmac.

On Day 2, I selected an R 1250 RT for a longer test ride on some of the most serpentine roads in the southern Appalachians. At 615 lb, the RT outweighs the F 900 R by 144 lb, and its larger engine makes an additional 37 hp. The performance of the RoadAttack 4s was even more impressive on a larger bike that placed greater demands on the tires. We didn’t get a chance to test the RoadAttack 4s on wet roads, so we’ll order a set soon and report back.

Continental RoadAttack 4 tires are available in a variety of sizes, with 17-inch and 19-inch fronts, 17-inch rears, and a GT version for heavyweight bikes.

Gracing the cover of Rider’s October 2022 issue was the Yamaha MT-10, a thrilling naked sportbike based on the YZF-R1. I had the privilege of riding the MT-10 at the press launch in North Carolina, and afterward, Yamaha loaned us an accessorized version for further testing (we’ll have a report in a future issue).

Related: 2022 Yamaha MT-10 | Video Review

Yamaha also offers an up-spec version called the MT-10 SP. Priced at $17,199 – a $3,000 premium over the standard model – the SP features Öhlins semi-active suspension, steel-braided front brake lines, a polished aluminum swingarm, a YZF-R1M-inspired Liquid Metal/Raven colorway with blue wheels, and a color-matched lower fairing.

The Yamaha MT-10 SP Goes for the Gold

The MT-10 SP is the first production motorcycle to be equipped with the Öhlins NIX30-SV fork and TTX36-SV rear shock. The “SV” stands for “spool valve,” a new damping technology that Öhlins claims improves rider comfort – not typically something high-performance sportbikes are known for.

According to the Swedish makers of those coveted yellow and gold suspension components, “unlike a traditional needle valve, Öhlins’ spool valve features a pressure compensation chamber that balances the force applied to the damper’s actuator, enabling quicker adjustment. The spool valve also provides increased sensitivity and responsiveness at the low and high ends of the adjustment range.”

Öhlins’ NIX30 fork and TTX36 shock are primo suspenders that were developed in the heat of World Superbike and Supersport competition. The semi-active versions on the MT-10 SP use inputs from sensors and a 6-axis IMU to electronically manage rebound and compression damping. Through the Yamaha Ride Control menu, riders can choose between three semi-active damping modes (A-1, A-2, and A-3) and three manual setting modes (M-1, M-2, and M-3).

GEAR UP

• HELMET: Fly Racing Sentinel
• JACKET: Fly Racing Butane
• GLOVES: Fly Racing FL-2
• PANTS: Fly Racing Resistance Jeans
• BOOTS: Fly Racing Milepost

Damping in the semi-active modes progresses from sporty/firm in A-1 (ideal for track riding) to mildly sporty in A-2 (good for public roads) to comfortable in A-3 (for when you’re loaded up with soft luggage and need to burn miles on a weekend tour). Should a rider feel so inclined, the “automatic” modes can be fine-tuned to suit one’s preferences. Though labeled in ascending order as well, the manual modes are customizable, allowing riders to electronically tune rebound and compression damping independently and save those settings. Preload front and rear must be adjusted manually.

Whereas many electronic rider aids like ABS, traction control, and wheelie control are essentially safety nets that work in the background to increase a rider’s margin of error, electronically controlled suspension truly enhances the overall riding experience. As good as the manually adjustable “analog” KYB suspension is on the standard MT-10, there is no ideal set of preload, rebound, and compression settings that adequately cover the range of riding and road conditions a rider is likely to encounter. The SP’s network of sensors and actuators adjust damping almost instantly – firming up the fork under hard braking to prevent excessive dive, stiffening the rear shock under hard acceleration to prevent squat, and compensating for changes in speed, lean angle, and so on.

At the test ride on the MT-10 SP was the usual gaggle of fast guys on curvy roads, with me doing my best to keep up while also trying to coax my ever-expanding beard up inside my helmet’s chinbar so I didn’t look like a billygoat. We started off at the Petersen Automotive Museum in Los Angeles and made our way along beat-up, traffic-clogged surface streets and poured-concrete freeways to the Pacific Coast Highway and then up into the Malibu hills on roads of varying quality and camber.

The “middle ground” A-2 semi-active mode is the SP’s default suspension setting, and as one might expect, it was firm without being too stiff. It absorbed the concrete seams on the freeway and the unavoidable recessed manhole covers on the PCH without undue harshness. The bike must be stopped before suspension settings can be changed, so at a stoplight, I switched to the sportier A-1 mode before the long, mostly smooth climb up Kanan Dume Road. All was well until I hit a big dip in the pavement at speed, which was a little too jarring for my taste.

After turning onto the notoriously tight, twisty, and – especially after a recent rainstorm – dirty Latigo Canyon Road, our group pulled over after our ride leader’s walkie-talkie fell out of his pocket. I switched back to A-2 mode and attacked the familiar corners with gusto while enjoying an upswell of confidence. Part of what makes semi-active suspension such a game changer in terms of both speed and safety is its ability to keep a motorcycle chassis stable and he tires’ contact patches in contact with the pavement.

After lunch, tumescent with too many tortilla chips and shrimp tacos, I switched over to A-3 mode and enjoyed a softer ride for our return to the Petersen. Burp.

See all of Rider‘s Yamaha coverage here.

Fast is as Fast Does

Except for the Öhlins semi-active suspension and steel-braided front brake lines, the latter providing better feel at the lever since the hoses can’t expand under pressure like rubber lines, the MT-10 SP is mechanically the same as the standard model. Which is to say, it’s one helluva motorcycle. The upgraded suspension pairs nicely with the MT-10 SP’s rock-solid chassis, strong brakes, and grippy tires, making for a potent, satisfying combination.

Our First Ride Review goes into more detail about updates to the MT-10 platform for 2022. In a nutshell, its 998cc inline-Four’s fuel injection, intake, and exhaust systems were revised to enhance the engine’s torque character, and new Acoustic Amplifier Grilles atop the fuel tank transmit tuned induction sound to the rider. Yamaha’s Accelerator Position Sensor Grip gives the throttle-by-wire system a more natural feel, and a new 6-axis IMU informs a full suite of YZF-R1-derived electronic aids, including lean-sensitive traction control, slide control, wheelie control, engine brake management, and cornering ABS. Other changes include a one-tooth-smaller rear sprocket, an up/down quickshifter, Brembo brake master cylinders, Bridgestone S22 tires, a 4.2-inch color TFT display, revised ergonomics, and stripped-down styling with full LED lighting.

Without a doubt, the star of the MT-10 show is its CP4 crossplane-crank engine. Rather than the high-pitched whine of a typical inline-Four, the CP4’s uneven firing interval results in a deep growl more like a V-4. Fueling and throttle response are spot-on. The engine feels a tad dull below 4,000 rpm, but it builds up a good head of steam in the midrange and goes gangbusters above 8,000 rpm. This is one of those engines that not only produces impressive power (138 hp at the rear wheel on an MT-10 we dyno’d a few years ago), but also delivers an engaging, visceral experience, encouraging one to roll on and off the throttle repeatedly to savor the full range of its sound and fury.

Through the menus on the TFT display, the Yamaha Ride Control system allows riders to select among four different ride modes (A, B, C, and D) to adjust throttle response and all the other electronic rider aids. Each mode has presets, but everything is customizable. Sifting through the various options and combinations of settings can be a little overwhelming, and Yamaha’s switchgear and menu system isn’t as user-friendly as what’s available on some other bikes we’ve tested, but most owners will find their preferred settings and stick to them. For me, that was suspension mode A-2, power mode 2 (standard), engine braking mode 2 (reduced), brake control mode 2 (lean-sensitive), and middle of the road settings for traction control, slide control, and wheelie control.

With the customization that the Yamaha Ride Control allows, riders can specify different personalities for the SP: hard-charging track weapon, surgical canyon carver, weekend sport-tourer, or daily commuter. Yamaha’s factory accessories for the MT-10 also fit the SP, so riders can further personalize their bike with frame and axle sliders, a Yoshimura slip-on exhaust, a windscreen, a comfort seat, 30L or 50L top cases, soft side cases, and more.

Special Sauce

If you’ve got your eye on the MT-10 and the SP model is within reach, the Öhlins semi-active suspension is worth the upcharge alone. The only downside is that it adds 5 lb to the bike’s curb weight compared to the standard model. The steel-braided front brake lines, polished swingarm, lower cowl, and exclusive paint job are nice bonuses, leveling up the MT-10 SP into a truly special machine. Or, in the words of G. Love & Special Sauce, a Philadelphia band I listened to in my college days: My baby got sauce, Your baby ain’t sweet like mine.

2023 Yamaha MT-10 SP Specs

• Base Price: $17,199
• Website: YamahaMotorsports.com
• Warranty: 1 yr., unltd. miles
• Engine Type: Liquid-cooled, transverse inline-Four, DOHC w/ 4 valves per cyl.
• Displacement: 998cc
• Bore x Stroke: 79.0 x 50.9mm
• Horsepower: 138 hp at 9,400 rpm (rear-wheel dyno, previous model)
• Torque: 77 lb-ft at 9,200 rpm (rear-wheel dyno, previous model)
• Transmission: 6-speed, cable-actuated slip/assist wet clutch
• Final Drive: Chain
• Wheelbase: 55.3 in.
• Rake/Trail: 24 degrees/4.0 in.
• Seat Height: 32.9 in.
• Wet Weight: 472 lb
• Fuel Capacity: 4.5 gal
• Fuel Consumption: 36 mpg (claimed)

Adventure bike owners love to add “farkles” from companies such as National Cycle to their bikes. A farkle, as many of you know, is an accessory, often a fancy one, that a motorcycle owner is likely to brag about. Some say the word is a mashup of “function” and “sparkle,” but we’ve also heard it’s an acronym for Fancy Accessory, Really Kool, Likely Expensive. (When I Googled “farkle,” the top result was from Dictionary.com: a combination of fart and chuckle, an involuntary fart caused by laughter. Gotta love the internet.)

Best known for its windscreens and windshields, National Cycle also makes accessories for select motorcycle models. As part of its Extreme Adventure Gear (XAG) line, it makes accessories for the ADV-styled Honda CB500X, and we installed some XAG accessories on our 2022 test bike.

Related: 2019 Honda CB500X | First Ride Review

One of the most popular upgrades for adventure bikes is supplemental protection against rocks, road debris, and tip-overs. We started off with National Cycle’s XAG Polycarbonate Headlight Guard (P/N N5400, $84.95), which is made of tough 3.0mm polycarbonate reinforced with the company’s proprietary Quantum hardcoat – said to provide 10 times the strength and 30 times the scratch resistance as acrylic, a claim National Cycle backs up with a three-year warranty against breakage.

The guard is thermoformed for an exact fit over the 2019-2022 CB500X headlight, and its crystal-clear optics do not distort or reduce illumination. Installation is simple: Just clean the headlight, remove the adhesive backing on the marine-grade Velcro tabs, and press the guard onto the headlight lens.

Next, to add crash protection as well as a place to mount auxiliary lighting, we installed the XAG Adventure Side Guards (P/N P4200, $429.95), which are also available for the Yamaha Ténéré 700. Made of black powdercoated steel, they complement the CB500X’s styling, especially the Pearl Organic Green/Black color scheme on our 2022 model. The guards are also treated inside and out with an electrophoretic coating to eliminate rust and corrosion.

The installation instructions provide a list of basic tools needed as well as a QR code that links to a helpful video. Installation is straightforward and took about 30 minutes, with the only challenge being a little extra effort needed to line the guards up with the engine mount holes.

The left and right guards attach to the engine in two places, and they bolt together in the middle just below the headlight. Once installed, they provide solid, sturdy protection. A flat metal tab with an open bolt hole that’s welded to the lower part of each guard provides a good attachment point for auxiliary lights.

As Reg Kittrelle says in his Triumph Tiger 900 GT Low review in the upcoming February issue, an ADV is a “motorcycle that can comfortably take me to distant places carrying lots of stuff.” The Honda CB500X is comfortable, but in stock form, it doesn’t provide many options for carrying gear, so we installed the XAG Luggage Rack (P/N P9304, $184.95). Like the side guards, the luggage rack is made of black powdercoated steel.

Also like the guards, installation of the rack requires only basic hand tools, takes about 30 minutes, and is clearly demonstrated in the instructions and video. On a stock CB500X, installation requires removal/reinstallation of the passenger grab handles since the mounting brackets share the same bolt holes. On our test bike, the grab handles had already been removed when Honda’s accessory saddlebag mounts were installed. And be advised: National Cycle’s luggage rack is not compatible with Honda’s accessory saddlebags.

The rack is a solid, stylish, practical add-on. It measures 8.625 inches front to back and has a tapered width that narrows from 6.75 inches at the front to 5 inches at the rear. The rack’s slotted surface and two holes on either side provide anchor points for straps or bungee cords. It sits a bit higher than the passenger portion of the seat, but together they provide a platform up to 23 inches in length for carrying a drybag, duffel, or tailbag.

Related: Motorcycle Camping on a Honda CB500X and Husqvarna Norden 901

Although we didn’t request one for our test bike, National Cycle also makes the XAG Lowering Kit and Kickstand (P/N P4900, $119.95) for the CB500X. It includes a shorter sidestand and two aluminum suspension link arms that lower the seat height by about 1.5 inches (from 32.8 to 31.3 inches). Only basic tools are required, installation takes 30-45 minutes, and you’ll need a wheel chock and a hydraulic jack or lift. As with the other accessories, in addition to the step-by-step instructions with photos, there’s a helpful video.

We put as many miles as possible on our test bikes, so we’re always interested in accessories that improve comfort. We’ve tested National Cycle’s VStream windscreens on many different motorcycles over the years, and we’ve consistently been impressed with their ability to improve wind protection while also reducing turbulence and buffeting. With their patented “V” shape, VStream windscreens are made of 3.0mm Quantum-hardcoated polycarbonate – the same durable material used for the headlight guard (and with the same warranty against breakage).

The VStream windscreen comes in three sizes for the CB500X, as seen below.

The Low windscreen is 16.75 inches tall, just slightly taller than stock, and it’s available in dark or light tint for $121.95. We opted for the Mid windscreen ($133.95), which is 19.25 inches tall (more than 2.5 inches taller than stock), much wider than stock near the top, and available only in light tint. The Tall windscreen ($139.95) is 21.75 inches tall (more than 5 inches taller than stock), even wider near the top, and available only in clear.

Compared to stock, the Mid-size VStream pushes air higher up and around the rider. Airflow hits at helmet height, but there’s no buffeting. There’s also excellent visibility over the top of the windscreen, providing an unobstructed view of the road ahead.  

Unlike most farkles, National Cycle’s XAG accessories are practical and reasonably priced. If you’ve got a Honda CB500X, check ’em out by clicking on the linked product names above.